Operation

This document describes how to operate the Harvest-PDAP Tool software. The following topics can be found in this document:

• Tool Execution
• Policy File
• Report Format

Note: The command-line examples in this section have been broken into multiple lines for readability. The commands should be reassembled into a single line prior to execution.

Tool Execution

Harvest-PDAP Tool can be executed in various ways. This section describes how to run the tool, as well as its behaviors and caveats.

% harvest-pdap -c policy.xml -l output.log
        

% harvest-pdap -c policy.xml -u {username} -p {password} -k {keystorePassword} \
-l output.log
        

Policy File

The Harvest-PDAP policy file is an XML-based configuration file that the tool uses to find products and register their metadata. This section details how to setup the policy file to do PDS product registration. The following is an example of a policy file to perform registration of ESA/PSA products:

<policy>
   <pdsRegistry url="http://localhost:8080/registry">
     <packageName>Harvest-PDAP Package</packageName>
     <packageDescription>
       This is a run that includes registration of products from the PSA.
     </packageDescription>
   </pdsRegistry>
   <pdapServices>
     <!-- Currently, the only valid value for 'agency' is 'esa'. -->
     <!-- Can optionally specify a 'startDate' to only get back data sets from the given date. -->
     <pdapService agency="esa" url="http://psa.esac.esa.int:8000"/>
   </pdapServices>
   <productMetadata>
     <!--
       All context product metadata definitions are captured in the
       global policy.
     -->
   </productMetadata>
   <resourceMetadata>
     <title>The Planetary Science Archive METADATA Query Service</title>
     <type>System.Browse</type>
     <slot name="resource_name">
       <value>The Planetary Science Archive METADATA Query Service</value>
     </slot>
     <slot name="resource_description">
       <value>The Planetary Science Archive METADATA Query Service</value>
     </slot>
   </resourceMetadata>
</policy>
      

The policy file is made up of the following complex type elements: pdsRegistry, pdapServices, productMetadata and resourceMetadata.

pdsRegistry

Each time the Harvest Tool runs, it creates a package in the registry to group the product registrations together. Specify this element to give a registry package a name and/or description. A required attribute of the pdsRegistry element named url, must be populated to specify the endpoint of the Registry Service. The following table describes the child elements that are allowed:

pdapServices

Specify this element to indicate the PDAP service endpoint for accessing product metadata for registration with the Registry Service. The following table describes the child elements that are allowed:

An optional atrribute can be specified within the pdapService element to fine tune the query: startDate. This attribute represents the date at which the data set was released to the public. The format of the date value should be YYYY-MM-DD As an example, the following specification will return ESA data sets starting from 2015-01-01:

<pdapService agency="esa" url="http://psa.esac.esa.int:8000" startDate="2015-01-01"/>
      

productMetadata

Specify this element to include additional metadata in the form of registry slots for every product. The following table describes the child elements that are allowed:

staticMetadata

Specify this element to include static metadata for every product. The following table describes the child elements that are allowed:

dynamicMetadata

Specify this element to include dynamic metadata for every product. The following table describes the child elements that are allowed:

resourceMetadata

Specify this element to include metadata for every resource product. A corresponding resource product is registered for every data set product registered. The following table describes the child elements that are allowed:

Report Format

This section describes the contents of the Harvest-PDAP Tool report. At this time, the tool only outputs a series of log messages. The log will report the success or failure of a discovered product attempting to be registered. A log consists of a severity level, file name, and a message. The following is an example of some of the log messages that can be expected from the Harvest Tool:

PDS Harvest-PDAP Tool Log

Version                     Version 0.1.1
Time                        Sun, Jun 09 2013 at 01:40:00 PM
Severity Level              INFO
PDAP Target(s)              [http://psa.esac.esa.int:8000]
Registry Location           http://localhost:8080/registry-psa
Registry Package Name       Harvest-PDAP Package
Registration Package GUID   urn:uuid:c554631c-a353-4b0f-9643-4796a921d523

INFO:   Connecting to PDAP Service: http://psa.esac.esa.int:8000
** AdaptiveByteStore default memory limit = 986M * 0.125 = 123M **
** malloc 2778306 bytes **
INFO:   [AIRUB-C-PHOTOCAM-2-EDR-HALLEY-1986-V1.0] \
Processing dataset.
INFO:   [AIRUB-C-PHOTOCAM-2-EDR-HALLEY-1986-V1.0] \
Additional metadata needed. Getting dataset catalog file.
INFO:   [AIRUB-C-PHOTOCAM-2-EDR-HALLEY-1986-V1.0] \
Retrieving VOLDESC.CAT to look up the data set catalog file name.
INFO:   [AIRUB-C-PHOTOCAM-2-EDR-HALLEY-1986-V1.0] \
Retrieving catalog file: DATASET.CAT
SUCCESS:   [AIRUB-C-PHOTOCAM-2-EDR-HALLEY-1986-V1.0] \
Successfully ingested product: \
urn:nasa:pds:...AIRUB-C-PHOTOCAM-2-EDR-HALLEY-1986-V1.0::1.0
INFO:   [AIRUB-C-PHOTOCAM-2-EDR-HALLEY-1986-V1.0] \
Product guid is urn:uuid:e7bba690-c946-4a80-b911-2a3a47fdde14
SUCCESS:   [AIRUB-C-PHOTOCAM-2-EDR-HALLEY-1986-V1.0] \
Successfully ingested product: \
urn:nasa:pds:...AIRUB-C-PHOTOCAM-2-EDR-HALLEY-1986-V1.0::1.0
INFO:   [AIRUB-C-PHOTOCAM-2-EDR-HALLEY-1986-V1.0] \
Product guid is urn:uuid:5147a7a6-dced-4402-8dd7-0b401c56b1f3

...

Summary:

2712 dataset(s) processed
64 error(s), 7290 warning(s)

2712 of 2712 datasets registered.

2712 of 2712 resources registered.

End of Log