NASA - National Aeronautics and Space Administration

+ NASA Homepage
+ NASA en Español
+ Contact NASA
Go
Planetary Data System - Engineering Node Banner

Installation

This document describes how to install the Transform Tool software contained in the transform package. The following topics can be found in this document:

System Requirements

The Transform Tool was developed using Java and will run on any platform with a supported Java Runtime Environment (JRE). The software was specifically developed under Java version 1.6 and has only been tested with this version. The following commands test the local Java installation in a UNIX-based environment:

% which java
/usr/bin/java

% java -version
java version "1.6.0_26"
Java(TM) SE Runtime Environment (build 1.6.0_26-b03-384-10M3425)
Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02-384, mixed mode)
      

The first command above checks whether the java executable is in the environment's path and the second command reports the version. If Java is not installed or the version is not at least 1.6, Java will need to be downloaded and installed in the current environment. Consult the local system administrator for installation of this software. For the do-it-yourself crowd, the Java software can be downloaded from the Oracle Java Download page. The software package of choice is the Java Standard Edition (SE) 6, either the JDK or the JRE package. The JDK package is not necessary to run the software but could be useful if development and compilation of Java software will also occur in the current environment.

Unpacking the Package

Download the transform package from the PDS FTP site. The binary distribution is available in identical zip or tar/gzip packages. The installation directory may vary from environment to environment but in UNIX-based environments it is typical to install software packages in the /usr/local directory and in Windows-based environments it is typical to install software packages in the C:\Program Files directory. Unpack the selected binary distribution file with one of the following commands:

% unzip transform-0.2.1-bin.zip
or
% tar -xzvf transform-0.2.1-bin.tar.gz
      

Note: Depending on the platform, the native version of tar may produce an error when attempting to unpack the distribution file because many of the file paths are greater than 100 characters. If available, the GNU version of tar will resolve this problem. If that is not available or cannot be installed, the zipped package will work just fine in a UNIX environment.

The commands above result in the creation of the transform-0.2.1 directory with the following directory structure:

  • README.txt

    A README file directing the user to the available documentation for the project.

  • LICENSE.txt

    The copyright notice from the California Institute of Technology detailing the restrictions regarding the use and distribution of this software. Although the license is strictly worded, the software has been classified as Technology and Software Publicly Available (TSPA) and is available for anyone to download and use.

  • bin/

    This directory contains batch and shell scripts for executing the tool.

  • doc/

    This directory contains a local web site with the Transform Tool documentation, javadoc, unit test results and other configuration management related information. Just point the desired web browser to the index.html file in this directory.

  • examples/

    This directory contains example PDS3 and PDS4 data products for use with the tool.

  • lib/

    This directory contains the dependent jar files for the tool along with the executable jar file (transform-0.2.1.jar) containing the Transform Tool software.

Configuring the Environment

In order to execute the Transform Tool, the local environment must first be configured appropriately. This section describes how to setup the user environment on UNIX-based and Windows machines.

UNIX-Based Environment

This section details the environment setup for UNIX-based machines. The binary distribution includes a shell script that must be executed from the command-line. Setting the PATH environment variable to the location of this script, enables the shell script to be executed from any location on the local machine.

The following command demonstrates how to set the PATH environment variable (in Bourne shell), by appending to its current setting:

% export PATH=${PATH}:/usr/local/transform-0.2.1/bin
        

In addition, the shell script requires that the JAVA_HOME environment variable be set to the appropriate location of the Java installation on the local machine. The following command demonstrates how to set the JAVA_HOME environment variable:

% export JAVA_HOME=/path/to/java/home
        

The system administrator for the local machine may need to be consulted for this location. The path specified should have a bin sub-directory that contains the java executable. This variable may also be defined within the scripts. Edit the scripts (files without the .bat extension) and change the line in the example above to represent the local Java installation.

Windows Environment

This section details the environment setup for Windows machines. The binary distribution includes a batch script that must be executed from the command-line. Setting the PATH environment variable to the location of this script, enables the batch script to be executed from any location on the local machine.

The following command demonstrates how to set the PATH environment variable, by appending to its current setting:

C:\> set PATH = %PATH%;C:\Program Files\transform-0.2.1\bin
        

In addition, the batch script requires that the JAVA_HOME environment variable be set to the appropriate location of the Java installation on the local machine. The following command demonstrates how to set the JAVA_HOME environment variable:

C:\> set JAVA_HOME = C:\path\to\java\home
        

The system administrator for the local machine may need to be consulted for this location. The path specified should have a bin sub-directory that contains the java executable. This variable may also be defined within the scripts. Edit the scripts (files with the .bat extension) and change the line in the example above to represent the local Java installation. Additional methods for setting Windows environment variables can be found in the Windows System Properties document.

Installation Location

Both the shell and batch scripts for this software utilize system commands for determining the installation home directory that may or may not be available on all platforms. If these commands are not available in the current environment, their use can be replaced in the scripts by setting the PARENT_DIR variable with the actual installation path. Modify the UNIX-based shell scripts as follows (the actual installation path may be different in the current environment):

SCRIPT_DIR=`dirname $0`
PARENT_DIR=`cd ${SCRIPT_DIR}/.. && pwd`

  should be replaced with:

PARENT_DIR=/usr/local/transform-0.2.1
        

Modify the Windows-based batch scripts as follows (the actual installation path may be different in the current environment):

set SCRIPT_DIR=%~dps0
set PARENT_DIR=%SCRIPT_DIR%..

  should be replaced with:

set PARENT_DIR=C:\Program Files\transform-0.2.1
        

FirstGov Logo
+ Freedom of Information Act
+ NASA 2003 Strategic Plan
+ NASA Privacy Statement, Disclaimer, and
   Accessiblity Certification

+ Copyright/Image Use Policy
NASA Logo
Curator: Emily.S.Law
Webmaster: Maryia Sauchanka-Davis
NASA Official: William Knopf
Last Updated:
+ Comments and Questions